A split system refers to a heating and AC systems that has two main parts: indoor and outdoor unit. The former absorbs heat energy in the cooling mode and the outdoor unit pushes away the heat absorbed by indoor unit. The cycle goes on unit the set temperature is met. Albeit the indoor and outdoor units are placed in different split locations, they are connected and run as one systems with the help of interconnecting, dehydrated copper refrigerant lines known as a line set. This article enlists the tips for Mini Split Heat Pump Installation in Salem OR.
- Identify the heating and cooling needs
People think that if the equipment is huge, it is effective. But as a matter of fact, it is quite the opposite. A load system calculation helps in making the mini spit successful. If you don’t know the load calculations, then consult an expert. This is done to determine the correct sized mini split system to be installed.
- Pay heed to installation manuals at all costs
While most of the mini split systems work the same, but you need to refer to installation instructions designed for a piece of equipment you are installing. You need to give it a thorough reed. Usually, an instruction manual is more of a legal document and a technical reference. Hence, all cautions and warnings must be included for your personal safety.
- How to install?
Clearances must be there to the front, sides and rears to offer adequate airflow via the outdoor unit. You may want it to be placed where it may not be eligible for the manufacturer. So, you need to spend time to be creative for placing the unit outdoor in order to meet the clearance and keeping the homeowner happy. A poorly placed outdoor unit can restrict airflow, reduce capacity and shut down eventually. If you want the unit to be concealed, then do it. But you must never compromise the minimum unit clearances.
- Indoor unit location
Before you install them permanently, clarity and verify the homeowner exactly when you want to place the indoor unit. If the homeowner doesn’t agree, then refer to the instructions manual to ensure that there is even air distribution in the room. The units placed too closely where the customer is may cause an objectionable noise, so avoid installing it where the customer may confront the unit directly in the room.